I think this is a question for Ray. I haven had my Mach2 operating in probably a month. This is probably a question for Ray. I hadn’t been connected to my Mach2 in probably a month. I use an Eagle 3 m

Please let us know when you’re safe at home. Looking forward to learning more about the keypad too. 😀 waynr

Shaikesh, check out the specs and the weight handling graph on the Mach2 page https://www.astro-physics.com/mach2gto wayne

In the unlikely event of clear skies on February 18th, I’ll be in Eastern Washington on a hill to observe/image the Mars occultation emergence just before 5:00 am. I’ll be using a 130GTX with QuadTCC

I’m considering setting up my AP1100 and camera TBD at a friend’s place in a darker sky area. I’m looking for reference guides or documentation on setting up and operating a remote telescope. There wi

I tried 2 cables with the same results. I’m wondering if it’s the DNS or other Ethrrnet settings on computer or CP4?

I got a new Eagle Computer and used a direct ethernet connection to my GTOCP4. This type of connection has worked before. When I boot up the computer and then start the GTOCP4 (what I've done before),

Richard, let me know what you’d like me to do. My email is wayneh9026 (at) yahoo (dot) com. I have an EL flat panel.

Dan, right now the scope is covered up and the camera put away due to the Seattle rains, but I will take a shot when the weather clears. Probably May? :-)

Amazing image John! I aspire to that quality. I did do moderate dithering with this image and it does help. I'm been in fairly frequent contact with the engineers at FLI, they are working at improveme

Try this simple link instead - didn't realize the other wouldn't work https://astrob.in/388722/0/

Finally got a clear night to continue to try out the new KL4040. The KL4040 is one of the new FLI eras using a Scientific CMOS (sCMOS) chip. I believe QHY will have their version out this spring. It o

I’ve got the Eagle Pro 2 and love it. Once I got the connectivity with TeamViewer figured out, it’s worked great over many hours of imaging. Tech support is in Italy so 9 hours off, but I generally ge

Right, I believe they are sending the new screws too. If not I'll check the documentation. Looks like the same spacing will work for the FF too - hopefully Wayne

Yes Dan it does. Thanks. I have a PP adapter and when the QuadTCC is threaded in, the end is flush with the end of the adapter. I too just ordered some more spacers. Do you recall how many you needed?

Don’t want to hijack the thread, but I’m trying to figure out how to use the MMOAG with CL5-7 fw and KL4040 which has the same size chip as 16803. With the spacers that came with the MMOAG I’m unable

It appears there's the residue of a dime-size dew spot on the inside surface of my objective, I'd guess the rear of the first element. It didn't appear until this evening when just starting imaging. I

I’m running a 130GTX with QTCC. As mentioned here before, I was having badly out of round stars with one camera and not the other. One avenue we looked into was the backfocus calculations. Turns out w

Right Peter, but the oval and comet shaped stars on the ASI weren’t just near the edge or corners. They went from the worst upper left then better to lower right. I think spacing is off too. Gonna get

Ran again last night with my QSI camera and Stars very round across the field. So definitely related to the ASI. Looks like I’ll need to get a tilt corrector, as I really like the camera.